6YL-150 Screw Oil Press

2021-01-09970

6YL-150 Screw Oil Press

One. Main performance parameters:

1. Speed of press shaft: 35-39 rpm

2. Gearbox transmission ratio: 15/381552=1:8.78

3. Equipped with power: 18.5KW

4. V-belt: Type B

5. Dimensions: length x width x height 2000x680x1460 (mm)

6.Single machine weight: 830kg

7. Output: 10-13 tons

How to disassemble and assemble the 6YL-150 spiral oil press cage (including strips, round ribs, and bone rings): 

Capacity see table (1)

Table(1)production capacity

 

raw material

feeding     per hour(t)

output   per

100kg raw   material

residue(%)

 

rape   seeds

Hot     pressing

9-12

30-38

7.5-8

Cold     pressing

5-6

28-35

 

 

Ground     nuts

Hot     pressing

9-12

35-45

7

Cold     pressing

5-6

32-40

 

 

Bean

 

Hot     pressing

9-11

10-16

6.5-7

 

Cold     pressing

4.5-5.5

8-14

 

olive

 

Hot     pressing

9-12

27-33

6

 

Cold     pressing

5-6

25-30

 

Cotton     seeds

 

Cold     pressing

5-7

10-14

5.5-6.5


2 Oration principle and structureNote  Figures shown above reflect performance when selecting separatingauxiliary facilities are available when manufacturing is rational.

2.1  oration principle

When oil presses operating prepared material enters extruding chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed. Under the high-pressure condition in the chamber ,friction between material and screw ,between material and chamber will be created ,which also creates friction and relative movement among material particles. On the other hand, root diameter of the pressing screw caries larger from one end to the other ,hence. When rotating ,it not only pushes particles moving forwards but turns them outwards as well ,meanwhile ,particles adjacent the screw  will rotation along with screw’ rotating ,causing every particle inside the chamber to possess different speed. Therefore relative movement among particle creates heat which is necessary during manufacturing because of helping protein change property ,damage colloid ,increase plasticity ,decrease oil’s elasticity ,resulting in high oil productivity. 

 

2. Structure: The machine consists of five parts: hopper part, gear box part, press chamber part, screw press part and frame part: see figure

(One)

 

Pic(1)

3Installment

The oil press must be installed by bolts firmly on the foundation and be kept horizontal

4.Lubrication

4.1 Oil press is lubricated by lubricating oil and grease, see table(2)

 

 

NO

lubrication

lubricate

Time span

Lubricate   replacement period

1

Adjusting bolt

Mechanical oil   NO.20

1-2time/day

 

2

Bevel gear

Mechanical oil   NO.20

1-2time/day

 

3

Bearing bush

Mechanical oil   NO.20

1-2time/day

 

4

Gearbox

Mechanical oil   NO.20

 

Refuel 12kg for   the first time

  Six   months

5

bearing

Grease

 


     once a year




previous product:6YL-160 SCREW OIL PRESS next product:6YL-130 SCREW OIL PRESS
Mail service
phone
WeChat service

WeChat service
more service

support hotline
0086-15639480959